Shading paints that wear off gradually over time and do not need to be cleaned off at the end of the season. This range is designed to offer growers an effective, user-friendly solution.
Temporary protection from light and heat for different periods of time without having to clean the paint off at the end of the season.
Often called On/Off, these paints produce results that are stable over time until removed using the appropriate cleaning product. Combining shading and diffusion solutions, this range gives growers control over when they remove the coating.
Removable protection against heat and light
Removable protection from light and heat for sun-sensitive crops
Removable protection from heat while maintaining grow-light
Removable diffuse light with high transmission
Removable diffuse coating with heat protection
Cleaner to remove shading- and diffusion paints
Not entirely sure which solution fits your needs best? We’ve collected some resources to help you out.
 |
Online Product AdviceGet instant product advice in 5 easy steps. |
 |
Understanding lightHow do our paints influence the sunlight? |
 |
FAQQuick answers to frequently asked questions. |
 |
How to apply Sudlac paintsInstructions for application of our paints on your greenhouse |
Applied on the various elements of the greenhouse structure, these solutions make it possible to maintain and protect your greenhouses from premature wear and tear.
Corrosion protection for heating pipes
Protects plastic film against premature wear
 |
We’ve got you coveredLearn about our companys goals and ambitions |
 |
HistoryWe’re celebrating our 60th anniversary, see how got here. |
Increases life of plastic film Harmless to crops Thermo-reflective effect Can be applied on plastic and metal surfaces
Solarprotect is a water-based paint that can be applied on plastic film that is in direct contact with metal structures, and/or on metal parts themselves. Thanks to its thermo-reflective effect and its whiteness, this product prevents the metal parts from overheating and protects the plastic film from premature wear caused by heat.
Plastic film coverings used for greenhouses wear out over time and need to be replaced to ensure their effectiveness. The surfaces in contact with the metal structure are most prone to premature wear, requiring replacement of the film. By protecting the metal parts in contact with plastic film from heating, Solarprotect increases the life of the film and reduces the frequency of replacement.
Solarprotect is ready to use and is applied with a roller or a brush on the plastic film in contact with the metal structure or directly on the metal parts themselves. The surfaces to be coated must be dry and cleaned beforehand. After use, clean brushes and rollers with water.
| Product | Product volume | Average surface area covered (m2) |
Average length covered (10 cm band width) |
|---|---|---|---|
| Per bucket | 15 Liter | 250 to 275 m2 | 2500 to 3000m |
